800W SFX Portable Edm Tap Remover 5/64" to 25/32"(Depth Setting)

Description

Short Description
1. Electrode Diameter Range: 0.8
~ 10mm (3
/64" ~ 25/64")
2. Travel (Z):
70
mm (27-9/16")
3. Max Processing Speed: 1mm/min (4/64"/min)
4. Remove Tap Size:
2 ~ 20
mm (
5/64" ~ 25/32
")
Description
1. EDMs abided by spark erosion principle is used  to remove broken taps, reamers, drills, screws and so on.
2. Non-contact working leads to no damage to the work piece. It also can mark or process imprecise holes on conducting
macterials.
3. This model could easily remove broken tap, broken bolt, broken screw sized (diameter) from 5/64" ~ 25/32".
4. Its Independent and magnetic work head with small size  make it easy to work on large work piece.
5. Equipped with vibrate motor improves the processing efficiency.
6. Depth setting; Auto retract and alarm; Reset button.
Machine Details:
Package:
One set per carton, each set is packaged by inner carton and outer carton totally two layers. Inner carton is surrounded by PE foam to protact the machine, 5 packing belts tied up on the outer carton.
Technical Details
Item
Unit
Spec.
Model No.
EDM-8C
Input Voltage
V
AC110V 60HZ 1 Phase
Secondary Output Voltage
V
10 ~ 70
Electrode Diameter Range
mm
1~10
inch
3/64 ~ 25/64
Travel (Z)
mm
70
inch
2-3/4
Max Processing Speed
mm/min
1
inch/min
3/64
Working Liquid
Tap water
Remove Taps Size (Diameter)
mm
2 ~ 20
inch
5/64 ~ 25/32
Machine Size (L × W × H)
mm
380*160*300
inch
14-61/64 × 6-19/64 × 11-13/16
Package Size
mm
498*308*392
inch
19-39/64 × 12-1/8 × 15-7/16
Net Weight
Kg
16
Lbs
35.2
Gross Weight
Kg
18
Lbs
39.6
Additional Information